Buy the right size light, and hang it in the right place
Enter a few measurements and get the fixture size to shop for, how high to hang it, and the exact spots to mark on the ceiling or wall. Every answer comes with a drawing to scale, in inches or centimeters.
No sign-upInches or cmRules shown, sources cited
Calculators
Nine tools, one job each. Every result is worked out from your measurements and drawn to scale.
From tape measure to ceiling mark
Three steps, the same in every calculator. Here's a 72 × 40″ table under a 9 ft ceiling.
Measure what's under the light
The table, island, mirror or room, plus the ceiling height. Everything else is worked out from those few numbers.
Get the size and the height
The calculator applies the published rules for that fixture and draws the result to scale, so you can see it before you buy.
Know exactly where to drill
Where it matters, you get the marks for the ceiling or wall, measured from an edge you can find with a tape measure.
Same chandelier. Different room.
Hung too high, a chandelier lights the ceiling and floats away from the table. At the right height, it lights the table and pulls the room together. Drag to compare.
How high to hang a chandelierRoom lighting plans
Five real rooms, planned start to finish with the calculators' own numbers: floor plan, fixture list and switching. Scroll →
We checked 19 lighting guides
Every guide agrees on 30–34″ above a table. Tall ceilings and chandelier width are another story.
Where published advice on chandelier and pendant heights agrees, and where it doesn't. Free data.
Read the studyGuides
The reasoning behind every calculator, with charts, worked examples and the places where sources disagree.
How the numbers work
Every number comes from a published rule, and every rule is shown.
Published rules, compared
Each calculator uses the sizing rules that lighting designers, retailers and electricians publish. Where those sources disagree, the page says so and explains which range we use. See every rule we use.
Drawn to scale
Every result is drawn from your measurements, so you can see how a 24″ chandelier really sits over a 40″ table before you buy it.
Rules of thumb, not code
These are design guidelines. Check the fixture's spec sheet and weight, follow local electrical code, and have a licensed electrician install hard-wired lights.